Quick Answer: Why Does My Pool Go Cloudy When I Add Chlorine?

Can you over shock a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water.

You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using..

What do I do if I put too much clarifier in my pool?

Yes, you can put too much clarifier in the pool, and about the only way to get rid of it is to filter it out or drain & refill alternately. You’ll need to watch your filter pressure and also check your filter media to see if it needs to be replaced as too much clarifier can gum up your sand or DE.

Can you put too much chlorine in a pool?

Having too much chlorine in your pool water can be dangerous. Exposure to high levels of chlorine can cause lung irritation, skin and eye damage, and provoke asthma. … High chlorine levels decrease the pH of your pool’s water, making it more acidic.

Can you backwash a pool too much?

Backwashing a filter too frequently will keep the sand so free of dirt buildup that it will not have the ability to remove the smaller particles of dirt and they will simply pass through sometimes causing cloudiness in water.

Will bleach clear up a cloudy pool?

The algae and bacteria start growing, and in a few weeks, you’ll have a cloudy pool. … Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.

Is it OK to swim if the pool water is cloudy?

Cloudy water is a drowning risk because it makes it more difficult to see swimmers who may be struggling or suspended under the water. Before you get into a pool, the CDC recommends that you check to see if the drain at the deep end of the pool is visible.

Can you use household bleach in pool?

Can You Use Household Bleach In A Pool? Technically, you can use household bleach as a means to sanitize your pool in a pinch, but it is best to use pool-grade chlorine in your pool as it has higher concentrations of chlorine, giving it the sanitizing capabilities needed to keep your pool clean and safe.

What can I use in my pool instead of chlorine?

There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you’ll still need to use some chlorine. A fourth alternative is PHMB, which doesn’t require the use of any chlorine. All four have drawbacks, including cost. Chlorine is relatively cheap.

How long does it take shock to clear a cloudy pool?

Thirdly, tripple-shock the pool using stronger Chlorine like In The Swim calcium hypochlorite (3pounds for 10k gallons) to kill all the algae; depending on the number of algae in the pool, it may take 2-3 days for the pool to clear up. The filter should run 24 hours a day for faster results.

Can I shock my pool 2 days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Why does my pool water get cloudy when I add shock?

4. FILTER OR PUMP PROBLEMS: If your pool is cloudy immediately after shocking, it’s not a problem with your pump or filter, but if your circulation is poor, or the filter is dirty or clogs up quickly, or if the pump doesn’t run long enough each day – all of these can create a problem with hazy pool water.

Should I shock my pool if it’s cloudy?

Shock Your Pool At Night To get rid of all the gross and dangerous crud in your cloudy pool water, shock your pool. This mega-dose of chlorine (or non-chlorine shock for pools that use other sanitizers) will eliminate cloudiness caused by bacteria, organic contaminants, and algae.

How often should a pool be shocked?

It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

What do you do after you shock your pool?

Answer: After shocking the pool, it will need filtration and circulation. Run the pump as much as possible. Keep the filter clean (daily) until the water runs clear. Be sure to brush the pool often during this process as above-ground pools do not have drains at the bottom.

Can too much chlorine cause cloudy water?

An excessive amount of pool chemicals can cause your water to be cloudy. That includes: high pH, high alkalinity, high chlorine or other sanitizers, and high calcium hardness. One of the only ways to immediately know what chemicals you’ve overused in your pool is through the pHin mobile app.

How much chlorine does it take to clear a cloudy pool?

Use a pool test kit to see if the water is poorly balanced. These kits are designed to evaluate the total chlorine, alkalinity, hardness and more, which help you determine the best cloudy pool water remedy. Chlorine levels should stay between 1.0 – 3.0 parts per million (PPM).

Will baking soda clear up cloudy pool?

To cure cloudy pool water, superchlorination is usually the easiest fix. Be sure to test your pH levels after the hyper-chlorination treatment, and slowly add baking soda to your pool water, if needed, to get to between 7.2 and 7.8. Higher pH levels can lead to cloudiness.