Quick Answer: Should I Shock My Pool When I First Fill It Up?

How long after filling a pool Can you swim?

1 weekHow soon after filling a pool can you swim.

After the pool is full it usually takes up to 1 week before the pool is ready for you to swim..

What happens if you go in a pool that was just shocked?

Common dangers presented in chemical shock treatments: Treatment is highly corrosive. Will cause skin and eye damage. May be fatal if swallowed. If this treatment gets in your eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes.

Can you over shock a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

Can you shock a pool two days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

What to put in a pool when you first fill it up?

To protect pool surfaces, use a non-phosphoric sequestering agent, (Stain & Scale) to keep minerals and metals locked up in solution. It’s important to add this chemical to the pool first, even as the pool is filling. Allow the agent 4-8 hours of filtration to make all of the chemical connections before adding chorine.

Should you cover a pool after shocking?

Never close the cover immediately after shocking the pool. It is recommended to wait several hours before closing the cover. Use a test kit to regularly test the pool water. If the tests results are good, this does not imply the water chemistry was good prior to your current test results.

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

What chemicals do I need to add to a freshly filled pool?

The Perfect Chemical Balance for a Pool Start UppH – 7.2-7.6.Alkalinity – 80-120 ppm.Calcium Hardness – 180-220 ppm.Cyanuric Acid – 30-50 ppm.Chlorine – 1-3 ppm.

How long after adding algaecide can you shock?

Keep your pump and filter running. Give the shock a good 12 to 24 hours to work it’s magic. If the algae hasn’t cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.

Why did my pool turn green after I shocked it?

Copper can be the cause of a green swimming pool. … Swimming pool owners may find their pool water turns green after they shock it. When swimming pool water turns green after being shocked, it is generally because there are metal particles in the water.

Do I use shock or algaecide first?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

How long can water sit in pool without chlorine?

24-48 hoursIf you are not adding chlorine to kill bacteria, the pool should be drained every other day. Stagnant water without chlorine, can become unhealthy water in just 24-48 hours.

How long does it take for algaecide to clear a pool?

five to seven daysTest and Balance the water Monitor your pool for a few days to see if any mold returns, running your pump regularly. After five to seven days, you can add algaecide to complete the cleaning process. Algaecide will work with the chlorine or oxidizer to kill and prevent white water mold from returning.

Is it OK to fill a pool overnight?

Hi, with 12″ of water in the pool you should be fine to let it fill all night. The stretching should be done and the liner tight against the wall. If so, let it go. There is some air gap between the liner and the wall in a few areas.

How long after putting bleach in Pool Can you swim?

4 hoursAnswer: Generally you will want to wait at least 4 hours, but ideal is waiting for one complete turnover of the water (the time it takes all the water to go through the filter).

How long does shock last in pool?

It is best to wait before going into the pool because liquid chlorine levels will be high after shocking, but it will be safe to swim after only 24 hours. Each chlorine compound is designed for a specific purpose.