Quick Answer: Should I Shock A New Pool?

How many times are you supposed to shock a pool?

When do you shock a pool.

To be very specific, you should use it when combined chlorine exceeds 0.2.

To generalize this we recommend using it at least once a week and no less than every other week.

It is also good practice if you do not have an automatic pool cover, to shock after heavy rains..

Should I backwash after shocking pool?

Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.

How do you ruin a pool?

Here are six common ways that pool owners damage their pools.Tearing the Pool Liner. … Not “Winterizing” the Pool or Spa Properly. … Not Maintaining Proper Ph and Alkalinity. … Not Brushing the Sides. … Adding Shock Directly Into the Filter. … Adding Shock Directly to the Water.

What order do you put chemicals in a pool?

Step 1 – Add Stain & Scale Treatment First! Allow the agent 4-8 hours of filtration to make all of the chemical connections before adding chorine. Step 2 – Water Balance: When a pool is refilled with fresh water, the first step is to balance the pH, Alkalinity and Calcium Hardness levels.

Do you shock a pool when you first fill it?

At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.

Can you put too much shock in a pool?

If you put too much shock in the pool, simply wait it out. If you have a cover on your pool, take it off. The more sun that hits your water, the faster it will dissipate. Technically, if your free chlorine levels are holding up swimming UP TO your shock level, depending on your CYA, is safe.

Does pool shock kill algae?

Getting Rid of Algae with Chlorine Shock Chlorine is a very effective sanitizer for water. When you maintain a swimming pool with 3ppm (parts per million) of chlorine, it will inhibit algae from growing. … The good news is, chlorine can also destroy algae; you just need to boost the levels.

Do you run filter when shocking pool?

Run the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

How long does it take a green pool to clear up after being treated?

24 hoursIf your pool is still green after 24 hours, there may be too much of the wrong chemicals, for example an excess of phosphate or cyanuric acid (“stabilizer”). It will take a while for the cloudiness to go away. For a sand filter, it will take a week or more.

How do you tell if there is too much chlorine in a pool?

3 Signs There’s Too Much Chlorine In Your PoolThe pH Level in Your Pool is 8 or Higher.You Notice Signs of Eye or Skin Irritation.Your Hair Feels Dry and Straw-Like.

Do I need to shock my new pool?

When opening your pool in the spring – When a pool is first opened, the chlorine level normally needs an immediate boost, and shock is the quickest and easiest way to accomplish this. If the chlorine level is already adquate, a non-chlorine shock may be used to treat the water.

How long do you have to wait to swim after you shock a pool?

After Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!

Can I shock my pool two days in a row?

It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Why is my pool still green after shocking it?

If the Shock Treatment Turned Your Water Green If you have green pool water after shocking your pool, then you may have too much copper in your water. You may have copper naturally present in your water source or it could be coming from the plumbing. You will need a chelating agent to clear up your water.

What chemicals do you add first when opening a pool?

First, balance total alkalinity because it’s like an umbrella measurement that can help protect pool conditions and keep chemicals levels in check. Raise total alkalinity with baking soda or soda ash and lower total alkalinity with muriatic acid.

How long after adding algaecide can you shock?

It’s important to know that using pool shock and algaecide together can create bad chemical reactions if you don’t take the necessary precautions. Your chlorine levels won’t return to normal right after you shock your pool anyway, so we recommend waiting at least 24 hours to add algaecide.

What happens if you go in a pool that was just shocked?

If you enter the pool immediately following a chlorine pool shock treatment, you are risking as little as skin and eye irritation and as much as fatality. Shocking your swimming pool is necessary, but take caution when doing so.

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

How often should you put chlorine in your pool?

If the pool is used more than 2 days a week, the water quality needs to be checked 2 to 3 times a week. If the pH value is good, check whether the chlorine tablet has completely dissolved or not. Once the chlorine tablet has dissolved, it is best to add 1 chlorine tablet per skimmer.

What time of day should I shock my pool?

Sun Down – You’ll want to shock your pool in the evening when the sun has gone down. This gives your pool plenty of time during the night to free the chlorine and clean the water. In the morning, you should be able to enjoy your pool. If you shock your pool during the day, the sun’s UV rays will dissolve the chlorine.

How long does pool shock take to work?

Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days it should stabilize.