Quick Answer: Can You Put Too Much Shock In A Pool?

How long after shocking pool can we swim?

24 hoursAfter Shocking Your Pool It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours..

Can I add shock and chlorine at the same time?

Yes, you can add both shock and chlorine to a pool. However, you should not add them at the same time. The best thing to do is to shock your pool first. Then, once the chlorine levels go down to a certain threshold, you can add more chlorine.

How much shock do I add to my pool?

Generally speaking, the dosage amount of pool shock is 1 lb. per 10,000 gallons, but consult the shock package label.

Can I shock my pool 2 days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

How much shock does it take to kill algae?

A general amount would be between 2 to 5 lbs of granular pool shock per 10,000 gallons of pool water – using more when cyanuric acid levels are above 30 ppm, or when the algae bloom is especially aggressive. Test the water the following day for pH and chlorine.

Does pool shock kill algae?

Large amounts of algae may require you to add up to three doses of shock over a 36-hour period. When using large amounts of shock to kill algae, water may become cloudy. This should not be a problem, and the water should clear up after running the filter. Wait until the chlorine ppm has fallen below 5.0.

Do you run filter when shocking pool?

Run the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

What happens if I swim in a shocked pool?

The type of shock treatment you use in your pool and the amount of time you wait will determine what happens if you swim in a shocked pool. … If you enter the pool immediately following a chlorine pool shock treatment, you are risking as little as skin and eye irritation and as much as fatality.

Will baking soda clear up a cloudy pool?

To cure cloudy pool water, superchlorination is usually the easiest fix. Be sure to test your pH levels after the hyper-chlorination treatment, and slowly add baking soda to your pool water, if needed, to get to between 7.2 and 7.8. Higher pH levels can lead to cloudiness.

Can you over shock pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

Can too much shock make a pool cloudy?

Sometimes you’ll get cloudy pool water after shocking. This is common and should dissipate over time. Just keep your filter running and it should clear up. Also, look into a new brand of shock (make sure you buy shock that has a main active ingredient of calcium hypochlorite).

Which is better liquid or powder pool shock?

Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.

How do I neutralize too much shock in my pool?

Add one-half ounce of sodium thiosulfate granules per 1,000 gallons of swimming pool water directly into the center of the pool. Allow swimming pool water to circulate with the sodium thiosulfate granules in the water for about 30 minutes.

Should I backwash after shocking pool?

Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.