Question: How Long Does It Take To Fill A Pool?

How long does it take to fill up pool?

12-24 hoursThe average pool can take 12-24 hours to fill and that is only if you have a few hoses chugging away.

When your family is chomping at the bit to dive in, that may as well be an eternity.

Forget this plan if you are using well water, you will burn up your pump or leave your home without water for days..

How long does it take to fill a 18×48 pool?

3. I filled mine with a garden hose in about 18 hours. It depends on the size hose, water pressure, etc. but it does hold around 6500 gallons, and if your hose delivers 10 gallons per minute it will take 650 minutes, or about 11 hours.

Will 2 hoses fill a pool faster than 1?

You have a 3/4″ line and all the water pressure of either a municipal water system or a water pump. Splitting that into two lines will not likely double the flow rate as there is a pressure drop, but it should increase the total flow rate considerably.

How much does it cost to fill a 10000 gallon pool?

If you don’t trust your well, it will cost about $200 to fill a 10,000 gallon pool using a good water company that will deliver drinking water. Be careful, some water delivery people will back up to a local pond to fill up.

How long does it take to fill a 24 pool?

For others that are filling a much larger pool it could take multiple days until your pool water has reached capacity. Assuming your water pressure is pumping at 8 gallons per minute (480 gallons per hour) through your outside water hose, it would take 31.25 hours to fill a 15,000 gallon swimming pool.

How long does it take to fill a 10 foot pool?

For the smallest Intex Easy Set, that’s 10 feet in diameter and has a depth of 30 inches, it will take about 1.5 hours for it to be filled up to 80% of its capacity using a hose with a 12 GPM flow rate.

How much does a truckload of pool water cost?

The pricing is in the range of $225 for a half tanker delivery. The average cost of a typical 24′ round pool (containing 14,700 gallons) with your water hose is going to cost you about $80-$160. These costs are depending where in the country you live and your local water supply markets.

What to put in a pool when you first fill it up?

To protect pool surfaces, use a non-phosphoric sequestering agent, (Stain & Scale) to keep minerals and metals locked up in solution. It’s important to add this chemical to the pool first, even as the pool is filling. Allow the agent 4-8 hours of filtration to make all of the chemical connections before adding chorine.

Should I shock pool after filling?

4. Add a clarifier to the water. The clarifier will help the filter to remove the very tiny particles that enter the pool in the filling process or that may remain following construction and installation. … Shock treat the pool using a quality non-chlorine shock.

How long does it take to fill a 10000 gallon pool with a garden hose?

A garden hose can fill a swimming pool in 7 days, and a larger hose can fill the pool in 4 days.

How many gallons of water is in a 10 foot round pool?

Pool Capacity CheatsheetPoolsize RoundCapacity (Gallons)Poolsize Oval15 Round5,00010×15, 10×1618 Round7,50010×21, 12×1821 Round10,00012×20, 12×2124 Round13,00012×24, 14×205 more rows

How long does it take to fill a 12×30 pool?

How long does it take to fill the pool with water? Answer : 2-5 hours, depending on which pool, hose size and water pressure.

How much does it cost to fill up a pool?

Cost to Fill in a Pool The average price to remove a swimming pool falls between $3,000 and $10,000. The cost to eliminate an above ground model averages $2,700. An inground unit can be extracted for $9,000 to $19,000 or filled in for about $5,000.

How do I raise the water level in my pool?

Using the Pool Pump Multiport ValveStart with your pump OFF.Open the two-way valve if there is one.Move the multiport valve to “WASTE”.Turn the pump ON and run until you reach the desired water level.Turn the pump OFF.Move the multiport valve back to “FILTER”Close the two-way valve if there is one.

Can you fill a pool overnight?

Hi, with 12″ of water in the pool you should be fine to let it fill all night. The stretching should be done and the liner tight against the wall. If so, let it go. There is some air gap between the liner and the wall in a few areas.

How many gallons is a 16×32 pool?

Standard In-Ground Pool Volumes in Gallons by Size14x2810,30011,80015×3011,80013,50016×3213,40015,40018×3617,00019,4008 more rows•Mar 11, 2020

How many chlorine tablets should I put in my pool?

To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you’d still use four, three-inch chlorine tablets.

How long does it take to fill a 8ft pool?

24-72 hoursThe general rule of thumb is that a single garden hose will raise the water level one inch per hour once the water level has reached the shallow end of the pool. This means that the average pool will fill in 24-72 hours depending on the volume of the pool.