Question: Do You Shock A Pool When You First Fill It?

Can you fill a pool overnight?

Hi, with 12″ of water in the pool you should be fine to let it fill all night.

The stretching should be done and the liner tight against the wall.

If so, let it go.

There is some air gap between the liner and the wall in a few areas..

Can I shock my pool 2 days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Why did my pool turn green after I shocked it?

However, the pool may turn green after shocking, which is caused by an increased amount of dissolved copper in the water. This copper can occur naturally in the water or come from copper plumbing that is leeching into the pool.

How long after adding algaecide can you shock?

It’s important to know that using pool shock and algaecide together can create bad chemical reactions if you don’t take the necessary precautions. Your chlorine levels won’t return to normal right after you shock your pool anyway, so we recommend waiting at least 24 hours to add algaecide.

Should I shock pool if chlorine is high?

HELPFUL POOL SHOCK TIPS TO ALWAYS REMEMBER: Shock if free chlorine level of your pool measures zero or combined chlorine level rises above 0.5. Always add shock to water NOT water to shock. … Always brush your pool after shocking, with the pump running, to help quickly distribute the chlorine.

When should I shock my pool?

We recommend shocking your pool once a week, or at least once every other week to properly maintain your water chemistry. The more often you use the pool, the more often you should reach for the swimming pool shock.

Can you put too much shock in a pool?

If you put too much shock in the pool, simply wait it out. If you have a cover on your pool, take it off. The more sun that hits your water, the faster it will dissipate. Technically, if your free chlorine levels are holding up swimming UP TO your shock level, depending on your CYA, is safe.

How do you ruin a pool?

Here are six common ways that pool owners damage their pools.Tearing the Pool Liner. … Not “Winterizing” the Pool or Spa Properly. … Not Maintaining Proper Ph and Alkalinity. … Not Brushing the Sides. … Adding Shock Directly Into the Filter. … Adding Shock Directly to the Water.

Do you run filter when shocking pool?

Run the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

Should I backwash after shocking pool?

Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.

Do you need to shock a new pool?

Every pool is different, and pools don’t need to be shocked, unless they need to be shocked – to remove bacteria, algae, chloramines or other contaminants, or to help clear cloudy pool water or some other water problem. You can test for chloramines and you can see algae, but bacteria and other pathogens are invisible.

What chemicals do you put in a pool for the first time?

Chemicals Checklist: Everything You Need to Open Your PoolA good test kit or test strips for checking your pool’s pH, calcium hardness, total alkalinity, and chlorine levels.Chlorine granules or tablets.Shock treatment.Increaser/decreaser chemicals for alkalinity, calcium, and pH.Algaecide.Stain treatment.

Do I add chlorine or shock first?

Low chlorine levels often cause green or hazy water, so if your water looks a little cloudy and you haven’t shocked in a while, adding shock is the first step. It is always best to shock the pool in the evening, when the sun if off the water.

Will Shock clear up a green pool?

Shock Your Pool with Chlorine to Kill Algae This is the main event in clearing a green pool—killing the algae. Pool shock contains a high level of chlorine that will kill the algae and sanitize the pool. For the best results, use a shock that contains at least 70% available chlorine, and shock the pool twice.

What happens if you go in a pool that was just shocked?

The type of shock treatment you use in your pool and the amount of time you wait will determine what happens if you swim in a shocked pool. … If you enter the pool immediately following a chlorine pool shock treatment, you are risking as little as skin and eye irritation and as much as fatality.

How long does it take for pool shock to work?

Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days it should stabilize.

How much shock do you put in a pool?

To shock your pool, use 2 pounds of shock for every 10,000 gallons of water, which should raise your chlorine to 10.0 ppm. Depending on your pool, you can use Leslie’s Power Powder Plus or Leslie’s Chlor Brite. After shocking the pool, run the circulation system for at least 2 hours before adding an algaecide.

Is it dangerous to swim in a green pool?

Bad pH. You see the pool water is green but there’s a high level of chlorine, and you know it isn’t algae. … If your pool has a green tinge, but it is not a deep green, you should be able to swim in it. However, you will want to avoid swimming in a dark green pool.